Removing a Cache Module
CAUTION:
To avoid bending the controller board, only remove or replace the cache module
when it is installed in the server blade.
To remove a cache module:
1.
If the BBWC battery will also be removed:
a.
Back up all data.
b.
Close all applications.
2.
Power of the server blade and remove it from the enclosure.
See
“Preparing the Server Blade for Servicing” (page 110)
.
3.
Remove the access panel.
See
“Removing the Server Blade Access Panel” (page 112)
.
4.
Remove any mezzanine cards blocking the cache module.
See
“Removing a Mezzanine Card” (page 123)
.
5.
Pull straight up on the cache module to remove it from the controller.
Figure 53 Removing the Cache Module
CAUTION:
The BBWC battery must remain connected to the cache module to preserve the
data when removing the cache module to transfer data.
Removing and Replacing a Cache Module
125
