HP MediaSmart Server User's Guide
2.
To plug in and power up your eSATA disk drive, see the documentation that came with your
device.
3.
Adding and Removing Drives Server Storage
Replacing the System Drive
Replacing the internal
system drive
consists of four parts:
1.
2.
Re-installing the New System Drive
3.
Resetting the System. See Using Server Recovery and Factory Reset.
4.
Reinstall the software on each computer. See
Installing the Software on Additional Home
Important
The system drive contains the Microsoft Windows Home Server operating system. The server
cannot operate while the system drive is removed and must be re-installed via the Server Recovery
Disc or factory reset. See Using Server Recovery and Factory Reset.
Removing the System Drive
The following figure shows the location of the system hard drive.
To remove the system drive
1.
Hold in the
Power
button for at least 4 seconds to force the server to shutdown.
242
Summary of Contents for EX485 - MediaSmart Server - 2 GB RAM
