HP EX485 - MediaSmart Server - 2 GB RAM, User Manual

Page: 237 / 336

Troubleshooting & FAQs
Note
THIS SOFTWARE CONTAINS A SECURITY FEATURE THAT WILL CAUSE END USER
CUSTOMER'S SYSTEM TO REBOOT WITHOUT PRIOR NOTIFICATION TO THE END
USER CUSTOMER AFTER 24 HOURS OF CONTINUOUS USE.
To recover your computer
1. Insert the PC Restore Disc into a CD/DVD drive in the computer you want to restore.
2. Restart the computer, and boot from the CD.
3. Follow the instructions in the Restore Wizard.
For additional information about restoring computer backups, see Restoring Computer Backups
in the Windows Home Server Console Help.
Recovering or resetting the server
Caution
Steps for performing a Server Recovery or Factory Reset. To recover or reset the server Use the
Server Recovery Disc from a computer using a wired connection to the
router (or switch). A
wireless connection is not recommended. Additionally, if the server is some distance from the
computer you are using for Server Recovery or Factory Reset, it may be more convenient to move
the server near the computer.
1. If the HP MediaSmart Server Control Center is open on your computer, close it before proceeding.
2. Insert the Server Recovery Disc into a DVD drive in a computer connected to the network by an
Ethernet cable.
The Server Recovery program automatically starts.
3. Click Next .
4. Uninstall HP MediaSmart Server and Windows Home Server Connector:
231