HP EX485 - MediaSmart Server - 2 GB RAM, User Manual, Page: 216 / 336

HP MediaSmart Server User's Guide
3. If you cannot access the Windows Home Server, check the network connections:
•
Make sure that all the cable connections are correctly plugged in.
•
Make sure the HP MediaSmart Server has power and the Network indicator light is aqua
white .
Make sure the router (or switch) has power.
•
Restart the router or switch (or unplug and plug it back in).
•
Restart all the devices on the network, including the computers and the server.
Make sure your server and computers are on the same logical network (subnet). See What is an
advanced network configuration? in the Windows Home Server Console Help.
4. If the computer that you transferring files from is connected wirelessly to the network, try
connecting it with an ethernet cable.
5. Check the Event Viewer to see if the System logs show a disconnect:
•
In Windows XP , click Start , Control Panel , Performance and Maintenance ,
Administrative Tools , and then select Event Viewer .
•
In Windows Vista , click Start , Control Panel , System and Maintenance ,
Administrative Tools , and then select Event Viewer .
Health Indicator Codes
The Tables below are a breakdown of the Health indicator displays. To see this code, using a
paper clip, press and release the recessed Status/Recovery button on the front of the server.
Health indicator codes when the indicator starts as solid red
Code Description Action
Solid red—no code Operating system or application
error. See Windows Home Server
Console for error condition.
1 aqua white, 2 red System drive failed to
boot.
If the light-bar for the system
drive (the lowest light-bar) is
also red, you need to
replace the
system hard drive .
210