HP EX485 - MediaSmart Server - 2 GB RAM, User Manual

Page: 10 / 336

HP MediaSmart Server User's Guide
The Front of the Server
Light Bar . There is one light bar for each internal SATA disk in the HP
MediaSmart Server. The server can hold up to four disks.
Power Light. The power light is solid aqua white when the server is
turned on.
Network Connection Light. The network connection light is solid aqua
white when the server is connected to the network via a router or switch.
Health Light . The health light is solid aqua white when the server is
operating correctly.
USB Port. Plug up to four USB 2.0 or later disk drives into the USB
ports to expand your storage space. There is one USB port on the front
and three on the back of the server.
The Back of the Server
USB Port. Plug up to four USB 2.0 or later disk drives into the USB ports
to expand your storage space. There is one USB port on the front and
three on the back of the server.
eSATA Port. Plug an eSATA (external SATA) hard drive into the eSATA
port to expand your storage space.
Ethernet Port. Connect the HP MediaSmart Server to your network using
an Ethernet cable.
Power Switch. Press to turn the HP MediaSmart Server on.
Power Port. Plug the included AC power cord into the HP MediaSmart
Server.
W
HAT
Y
OU
'
LL
N
EED TO
S
ET UP THE
S
ERVER
One or more open ports on a router connected to your network. The HP MediaSmart Server must
be wired to the router. The network connection must support 100 Mbps to 1000 Mbps (Gigabit
Ethernet).
The router must have DHCP enabled to provide an automatic IP address to the server. See your
router's documentation for additional information.
4