manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Computer seems to be locked up.

Cause

Solution

Program in use has stopped responding to commands.

1.

Use the task manager to close programs that do not 
respond.

2.

Attempt the normal Windows “Shut Down” procedure. If this 
fails, press the power button for four or more seconds to 
turn off the power. To restart the computer, press the power 
button again.

Solving media card reader problems

Media card will not work in a digital camera after formatting it in Windows.

Cause

Solution

By default, Windows will format any media card with a capacity 
greater than 32MB with the FAT32 format. Some digital cameras 
use the FAT (FAT16 & FAT12) format and can not operate with a 
FAT32 formatted card.

Either format the media card in the digital camera or select FAT 
file system to format the media card in a computer with Windows.

A write-protected or locked error occurs when attempting to write to the media card.

Cause

Solution

Media card is locked. Locking the media card is a safety feature 
that prevents writing to and deleting from an SD/Memory 
Stick/PRO card.

If using an SD card, make sure that the lock tab located on the 
right of the SD card is not in the locked position. If using a Memory 
Stick/PRO card, make sure that the lock tab located on the bottom 
of the Memory Stick/PRO card is not in the locked position.

Can not write to the media card.

Cause

Solution

The media card is a read-only memory (ROM) card.

Check the manufacturer’s documentation included with your card 
to see if it writable. Refer to the previous section for a list of 
compatible cards.

Media card is locked. Locking the media card is a safety feature 
that prevents writing to and deleting from an SD/Memory 
Stick/PRO card.

If using an SD card, make sure that the lock tab located on the 
right of the SD card is not in the locked position. If using a Memory 
Stick/PRO card, make sure that the lock tab located on the bottom 
of the Memory Stick/PRO card is not in the locked position.

Unable to access data on the media card after inserting it into a slot.

Cause

Solution

The media card is not inserted properly, is inserted in the wrong 
slot, or is not supported.

Ensure that the card is inserted properly with the gold contact on 
the correct side. The green LED will light if inserted properly.

Solving media card reader problems

79

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands