manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Drive not found (identified).

Cause

Solution

The device is attached to a SATA port that has been hidden in 
Computer Setup.

Run the Computer Setup utility and ensure Device Available is 
selected for the device's SATA port in Advanced > Port Options.

Drive responds slowly immediately after power-up.

Run Computer Setup and increase the POST Delay in Advanced > 
Boot Options.

Nonsystem disk/NTLDR missing message.

Cause

Solution

The system is trying to start from the hard drive but the hard 
drive may have been damaged.

▲

Perform Drive Protection System (DPS) testing in system 
ROM.

System files missing or not properly installed.

1.

Insert bootable media and restart the computer.

2.

Boot to the windows installation media and select the 
recovery option. If only a restore kit is available, then select 
the File Backup Program option, and then restore the 
system.

3.

Install system files for the appropriate operating system.

Hard drive boot has been disabled in Computer Setup.

Run the Computer Setup utility and enable the hard drive entry in 
the Advanced > Boot Options list.

Bootable hard drive is not attached as first in a multi-hard drive 
configuration.

If attempting to boot from a hard drive, ensure it is attached to 
the system board dark blue SATA connector.

Bootable hard drive is not listed first in the Boot Order.

Run the Computer Setup utility and select Advanced > Boot 
Options and ensure the bootable hard drive is listed immediately 
under the Hard Drive entry.

Computer will not boot from hard drive.

Cause

Solution

The device is attached to a SATA port that has been hidden in 
Computer Setup.

1.

Check SATA cable connections.

2.

Run the Computer Setup utility and ensure Device Available 
is selected for the device's SATA port in Advanced > Port 
Options.

Boot order is not correct.

Run the Computer Setup utility and change boot sequence in 
Advanced > Boot Options.

Hard drive is damaged.

Observe if the front panel Power LED is blinking RED and if any 
beeps are heard. See 

POST error messages and diagnostic front 

panel LEDs and audible codes on page 102

 to determine possible 

causes for the blinking red and beep codes.

See the Worldwide Limited Warranty for terms and conditions.

78

Chapter 6   Troubleshooting without diagnostics

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands