manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Fan

The fan sits between the fan sink and the front of the computer.

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 20

).

2.

Remove the top cover (

Top cover on page 21

).

3.

Lift the tab on the outer edge of the fan and rotate the fan upward.

4.

Disconnect the fan plug from the system board, and then lift the fan out of the chassis.

To install the fan, reverse the removal procedure.

Fan

37

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands