manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Diagnostics reports a failure.

Cause

Solution

The cable is not securely connected.

Ensure that the cable is securely attached to the network 
connector and that the other end of the cable is securely attached 
to the correct device.

The cable is attached to the incorrect connector.

Ensure that the cable is attached to the correct connector.

There is a problem with the cable or a device at the other end of 
the cable.

Ensure that the cable and device at the other end are operating 
correctly.

The network controller is defective.

Contact an authorized service provider.

Diagnostics passes, but the computer does not communicate with the network.

Cause

Solution

Network drivers are not loaded, or driver parameters do not 
match current configuration.

Make sure the network drivers are loaded and that the driver 
parameters match the configuration of the network controller.

Make sure the correct network client and protocol is installed.

The network controller is not configured for this computer.

Select the Network and Sharing Center icon in the Control Panel 
and configure the network controller.

To access Control Panel in Windows 7, click Start, and then select 
Control Panel.

To access Control Panel in Windows 8.1, from the Start screen, 
type 

c

, and then select Control Panel.

To access Control Panel in Windows 10, type 

control panel

 in 

the taskbar search box, and then select Control Panel from the 
list of applications.

Network controller stopped working when an expansion board was added to the computer.

Cause

Solution

The network controller requires drivers.

Verify that the drivers were not accidentally deleted when the 
drivers for a new expansion board were installed.

Network controller stops working without apparent cause.

Cause

Solution

The files containing the network drivers are corrupted.

Reinstall the network drivers using the Recovery Disc Set in 
Windows 7 or Windows recovery tools in Windows 8.1.

If necessary, download the softpaq from the web (from a different

 

computer).

The cable is not securely connected.

Ensure that the cable is securely attached to the network 
connector and that the other end of the cable is securely attached 
to the correct device.

The network controller is defective.

Contact an authorized service provider.

Solving Network Problems

93

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands