manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Secondary fan (EliteDesk 800 and MP9 models only)

HP EliteDesk 800 G2 and HP MP9 G2 Retail System models include a secondary fan installed under the hard 
drive.

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 20

).

2.

Remove the top cover (

Top cover on page 21

).

3.

Remove the hard drive (

Hard drive on page 23

).

4.

Disconnect the fan plug from the system board (1).

5.

Remove the two screws securing the secondary fan (2).

6.

Lift the fan out of the chassis (3).

To install the secondary fan, reverse the removal procedure.

26

Chapter 4   Removal and replacement procedures – desktop mini (DM) chassis

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands