manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

4.

Pull the release lever next to the rear of the HDD away from the HDD (2). While pulling the release lever 
out, slide the drive back until it stops, then lift the HDD up and out of the cage (3).

5.

To install a HDD, you must transfer the silver and blue isolation mounting guide screws from the old HDD 
to the new HDD.

6.

Align the guide screws with the slots on the chassis drive cage, press the HDD down into the cage, then 
slide it forward until it stops and locks in place (1).

24

Chapter 4   Removal and replacement procedures – desktop mini (DM) chassis

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands