manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

14.

On the rear of the computer, remove the antenna cover by pressing on the tab on the top of the cover 
(1), and then rotating the cover off the computer (2).

15.

Antenna transceivers are connected to the front and back of the computer as shown in the following 
image.

16.

Remove the front transceiver from the inside of the computer by pressing the tab to disengage the 
transceiver and removing the transceiver (arrow in following image points to the tabs on the inside of 
the computer).

Internal WLAN antenna cable removal/installation

55

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands