manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Computer date and time display is incorrect.

Cause

Solution

RTC (real-time clock) battery may need to be replaced.

NOTE:

Connecting the computer to a live AC outlet prolongs the 

life of the RTC battery.

Reset the date and time under Control Panel (Computer Setup 
can also be used to update the RTC date and time). If the problem 
persists, replace the RTC battery. See the Removal and 
Replacement section for instructions on installing a new battery, 
or contact an authorized dealer or reseller for RTC battery 
replacement.

To access Control Panel in Windows 7, select Start, and then 
select Control Panel.

To access Control Panel in Windows 8.1, from the Start screen, 
type 

c

, and then select Control Panel from the list of 

applications.

To access Control Panel in Windows 10, type 

control panel

 in 

the taskbar search box, and then select Control Panel.

There is no sound or sound volume is too low.

Cause

Solution

System volume may be set low or muted.

1.

Check the Computer Setup settings to make sure the 
internal system speaker is not muted (this setting does not 
affect the external speakers).

2.

Make sure the external speakers are properly connected and 
powered on and that the speakers' volume control is set 
correctly.

3.

Use the system volume control available in the operating 
system to make sure the speakers are not muted or to 
increase the volume.

Cannot remove computer cover or access panel.

Cause

Solution

Smart Cover Lock, featured on some computers, is locked.

Unlock the Smart Cover Lock using Computer Setup.

In case of forgotten password, power loss, or computer 
malfunction, you must manually disable the Smart Cover lock . A 
key to unlock the Smart Cover Lock is not available from HP. Keys 
are typically available from a hardware store.

Poor performance.

Cause

Solution

Processor is too hot.

1.

Make sure airflow to the computer is not blocked. Leave a 
10.2-cm (4-inch) clearance on all vented sides of the 
computer and above the monitor to permit the required 
airflow.

2.

Make sure fans are connected and working properly (some 
fans only operate when needed).

Solving general problems

73

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands