manualshive.com logo in svg

HP EliteDesk 705 G2 Desktop Mini, Maintenance And Service Manual

The HP EliteDesk 705 G2 Desktop Mini is a powerful and compact computer that offers exceptional performance. To fully understand and utilize its hardware features, you can effortlessly download the free Hardware Reference Manual from manualshive.com. This comprehensive manual ensures optimal usage of your device, empowering you with in-depth knowledge and guidance.

Share
Download
background image

Table 5-3

  Computer Setup—Advanced (for advanced users) (continued)

●

Serial port B

●

SATA0

●

SATA1

●

SATA2

●

SATA3

●

SATA5

●

Front USB ports

●

Rear USB ports

●

USB charging port function

●

Media card reader

Restrict USB Devices

Specify the following categories of USB devices to enable:

●

Allow all USB devices

●

Allow only keyboard and mouse

●

Allow all but storage devices and hubs.

When some devices are restricted, the system will disable USB ports that do not meet the allowed 
criteria. This feature is usually combined with similar policies within the operating system since USB 
devices can be moved to different ports. The ports disabled by the BIOS will remain disabled until the 
system is restarted.

Option ROM Launch 
Policy

These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is ‘All legacy’ for 
Windows 7 and other non-Windows configurations. Default is ‘All UEFI’ for Windows 8.1 or later.

Configure Option ROM Launch Policy

●

All legacy

●

All UEFI

●

All UEFI except video

Power Management 
Options

Runtime Power Management (enable/disable)

Allows certain operating systems to reduce processor voltage and frequency when the current software 
load does not require the full capabilities of the processor. Default is enabled.

Extended Idle Power States (enable/disable)

Allows certain operating systems to decrease the processors power consumption when the processor is 
idle. Default is enabled.

S5 Maximum Power Savings (enable/disable)

Enabling this feature reduces the power of the system as much as possible in the S5 state. Power is 
removed from the wake up circuitry, the expansion slots, and any management features while in S5. 
Default is disabled.

SATA Power Management (enable/disable)

Enables or disables SATA bus and/or device power management. Default is enabled.

PCI Express Power Management (enable/disable)

Enabling this option permits the PCI Express links to use Active Power State Management (ASPM) to enter 
lower power states while not in use. Default is enabled.

Unique Sleep State Blink Rates (enable/disable)

Computer Setup (F10) Utilities

67

Summary of Contents for EliteDesk 705 G2 Desktop Mini
















































































































































Reviews:

No comments

Related manuals for EliteDesk 705 G2 Desktop Mini

Brands by name

Popular brands

Load more brands