![background image](http://html.mh-extra.com/html/hp/635n/635n_administrators-manual_163680094.webp)
Status
The
Status
page displays the current security configuration settings of the print server. The settings
that will be displayed depend on the features supported by the print server.
Wizard
NOTE
If you use HP Web Jetadmin to manage your devices, you should not use this wizard.
Instead, use HP Web Jetadmin to configure your network security settings to ensure they are
properly set for your network.
The
Wizard
page allows you to run the
HP Jetdirect Security Configuration Wizard
. This wizard
will guide you through the print server's security configuration needed for your network. Click
Start
Wizard
to run the wizard. This opens the
Security Level
page.
The optional configuration parameters presented by the wizard will depend on your choice of security
level. For an overview, see
Table 4-14 Wizard Security Levels
.
NOTE
If you improperly exit the wizard (for example, by failing to use the Cancel button), an
Operation Failed
screen may appear. If so, wait approximately two minutes before entering
the wizard again.
Restore Defaults
This page is used to restore security configuration settings to factory defaults. The default settings
displayed depend on the features supported by the print server.
Only the security settings listed are restored to factory defaults, other configuration settings are not
affected.
Table 4-14
Wizard Security Levels
Security Level
Description
Basic Security
This option requires that you configure an administrator password for configuration
management. The administrator password is shared with other management tools, such
as Telnet and SNMP applications. However, some management tools, such as Telnet,
use plain-text communications and are not secure.
The
Administrator Account
page is used to enter the administrator password. The
Administrator Password will also be used as the SNMP v1/v2 Set Community Name for
SNMP management applications.
The
Configuration Review
page displays all the current settings that may affect
security. Click
Finish
to set your basic security selections.
Enhanced Security
(Recommended)
(Full-featured print servers only) This option adds to Basic Security by automatically
disabling management protocols that are do not use secure, encrypted communications
(such as Telnet and FTP firmware updates, RCFG, SNMP v1/v2c). To change
individual protocol settings, see
Mgmt. Protocols
.
The
Administrator Account
page is used to enter the administrator password.
84
Chapter 4 HP Jetdirect Embedded Web Server (V.31.xx)
ENWW
Summary of Contents for 635n
