HP 635n, Administrator'S Manual

Page: 66 / 194

100HALF : 100 Mbps, half-duplex operation.
10FULL : 10 Mbps, Full-duplex operation.
10HALF : 10 Mbps, half-duplex operation.
Support
Web JetAdmin URL (Read-only parameter) If HP Web Jetadmin discovers this device, the URL to access
HP Web Jetadmin will be specified.
Web JetAdmin Name (Read-only parameter) If HP Web Jetadmin discovers this device, the name of the HP
Web Jetadmin host will be specified (if known).
support-contact Typically used to identify the name of a person to contact for support of this device.
support-number Typically used to specify a phone or extension number to call for support of this device.
support-url A Web URL address for product information on this device over the Internet or an
intranet.
tech-support-url A Web URL address for technical support over the Internet or an intranet.
Menu Interface
An optional Menu interface is displayed when you type menu at the Telnet command prompt. The
Menu interface eliminates the need to memorize commands, and provides structured menu lists for
easy access to configuration parameters.
Figure 3-1 Example: Using the Menu Interface illustrates the Menu interface, using the TCP/IP
menus as an example.
■ From the Main Menu screen, select and enter a menu number. If there are submenus, select
and enter a submenu number.
■ If you want to change a parameter setting, enter “Y” (for “Yes”) when prompted.
Changes to parameters are made by editing the setting through the use of the Backspace key. If
an unrecognized value is entered, the correct entry options will be displayed.
NOTE Changes are not saved on the Jetdirect print server until you exit a menu and, when
prompted, choose to save your changes.
Table 3-3 Telnet Commands and Parameters (continued)
56 Chapter 3 TCP/IP Configuration ENWW