![background image](http://html.mh-extra.com/html/hp/635n/635n_administrators-manual_163680055.webp)
Command Line Interface (Default)
Using the Telnet command line interface, you can set configuration parameters using the following
procedures:
NOTE
During a Telnet session, enter
?
to view available configuration parameters, the
correct command format, and a list of commands.
To list additional (or advanced) commands, enter the command
advanced
before entering
?
.
To display current configuration information, enter
/
.
1
At the Telnet prompt “
>
” type:
<parameter>: <value>
then press
Enter
, where
<parameter>
refers to the configuration parameter you are defining,
and
<value>
refers to the definitions you are assigning to that parameter. Each parameter entry
is followed by a carriage return.
See
Table 3-3 Telnet Commands and Parameters
for configuration parameters.
2
Repeat the previous step to set any additional configuration parameters.
3
When you have finished typing the configuration parameters, type
exit
or
quit
(depending on
your system).
When prompted whether to save settings that you have changed, enter
Y
(default) for Yes, or
N
for No.
If you enter
save
instead of
exit
or
quit
, you will not be prompted to save settings.
Telnet Commands and Parameters
.
Table 3-3 Telnet Commands and Parameters
lists the
available Telnet commands and parameters.
NOTE
If a parameter is supplied dynamically (for example, from a BOOTP or DHCP server),
its value cannot be changed using Telnet without first setting Manual configuration. To set
Manual configuration, see the
ip-config
command.
Whenever you are manually changing an IP address, you should also reconfigure the subnet
mask and default gateway at the same time.
Table 3-3
Telnet Commands and Parameters
Command
Description
User Control Commands
?
Displays the Help and Telnet commands.
/
Displays current values.
menu
Displays the
Menu Interface
for access to configuration parameters.
advanced
Enables the Advanced commands. Help (?) will include the Advanced commands in the
list.
ENWW
IPv4 Configuration
45
Summary of Contents for 635n
