HP 635n, Administrator'S Manual

Page: 174 / 194

Classic Control Panel
Classic control panels can typically display two lines of 16 characters each.
As described in Table C-1 HP Jetdirect Classic Control Panel Menu , the HP Jetdirect control panel
menu allows you to enable or disable network protocols, and configure selected network parameters.
On the control panel display, an asterisk (*) is used to identify the selected value.
Table C-1 HP Jetdirect Classic Control Panel Menu
Menu Item Description
CFG NETWORK =
Selects whether or not you want to access the Jetdirect menu.
NO (default): Bypass the HP Jetdirect menu.
YES: Access the HP Jetdirect menu. You must change this to YES* each time you want to
access the menu.
TCP/IP =
IPX/SPX =
DLC/LLC =
ATALK =
Identifies whether the protocol stack is enabled or disabled.
ON (default): The protocol is enabled.
OFF: The protocol is disabled.
CFG TCP/IP = Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters.
NO (default): Bypass the TCP/IP menu items.
YES: Access the TCP/IP menu items.
■ BOOTP=YES* enables IPv4 configuration by a BootP Server.
■ DHCP=YES* enables IPv4 configuration by a DHCP Server.
If DHCP=YES* and the print server has a DHCP lease, you can choose to configure the
following DHCP settings:
■ RELEASE: Choose YES to release, or NO to save, the current DHCP lease.
■ RENEW: Choose YES to renew the current DHCP lease, or NO to not renew the
DHCP lease.
■ AUTO IP=YES* will automatically assign a link-local IPv4 address in the form 169.254.x.x.
164 Appendix C The HP Jetdirect EIO Control Panel Menu ENWW