Menu Item
Description
If you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you can manually set the
following TCP/IPv4 parameters from the control panel:
■
Each byte of the IPv4 address (IP)
■
Subnet Mask (SM)
■
Syslog Server (LG)
■
Default Gateway (GW)
■
Idle Timeout period (default is 270 seconds, 0 disables the timeout)
■
CFG DNS 1=YES* will allow you to specify the IPv4 address of a primary DNS server,
one byte at a time.
■
CFG DNS 2=YES* will allow you to specify the IPv4 address of a secondary DNS server,
one byte at a time.
■
IPV6 = YES* enables IPv6 operation on the print server. Select NO to disable IPv6
operation.
■
POLICY=<option> allows you to select one of the following IPv6 addressing policies for
the print server.
■
RTR_AV: (default) The stateful auto-configuration method to be used by the print
server is determined by a router. The router specifies whether or not the print server
is to obtain its address, its configuration information, or both from a DHCPv6 server.
■
RTR_UN: If a router is not available, the print server should attempt to obtain its
stateful configuration from a DHCPv6 server.
■
ALWAYS: Whether or not a router is available, the print server will always attempt to
obtain its stateful configuration from a DHCPv6 server.
■
MANUAL=<option> specifies the behavior for a manually-configured IPv6 address
detected on the print server.
■
KEEP: (default) If configured, maintain the address in an active state.
■
DISABLE: If configured, maintain the address but in an inactive state.
Print a Jetdirect configuration page to verify your settings. However, note that the print server
may overwrite selected parameters with values that ensure proper operation.
CFG IPX/SPX
=
Selects whether you want to access the IPX/SPX menu and set IPX/SPX protocol parameters.
NO (default): Bypass the IPX/SPX menu items.
YES: Access the IPX/SPX menu items.
In the IPX/SPX menu, you can specify the
Frame Type
parameter used on your network.
■
AUTO (default) will automatically set and limit the frame type to the first one detected.
■
For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, EN_SNAP.
WEB
=
For configuration management, specify whether the embedded Web server will accept
communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS.
HTTPS: For secure, encrypted communications, only HTTPS access is accepted. The print
server will appear as a secure site.
HTTP/HTTPS: Access using either HTTP or HTTPS is permitted.
Table C-1
HP Jetdirect Classic Control Panel Menu (continued)
ENWW
Classic Control Panel
165
Summary of Contents for 635n
