![background image](http://html.mh-extra.com/html/hp/635n/635n_administrators-manual_163680064.webp)
ipx-frametype
Specifies the IPX frame type settings available for your print server model:
AUTO
(default),
EN_SNAP, EN_8022, EN_8023, EN_II
. For more information, see
HP
Jetdirect Configuration Pages
.
ipx-sapinterval
Specifies the time interval (1 to 3600 seconds) that the HP Jetdirect print server waits
between Service Advertising Protocol (SAP) broadcasts on the network. The default is
60 seconds. 0 disables SAP broadcasts.
ipx-mode
(Read-only parameter) Specifies the NetWare mode configured on the print server,
either RPRINTER or QSERVER mode.
ipx-nds-tree
An alphanumeric string, up to 31 characters, that specifies the NDS tree name for the
print server.
ipx-nds-context
An alphanumeric string, up to 256 characters, that specifies the NDS context for the HP
Jetdirect print server.
ipx-job-poll
Specifies the time interval (1 to 255 seconds) that the HP Jetdirect print server will wait
to check for print jobs in a print queue. The default is 2 seconds.
pjl-banner
(ipx-banner)
Enables or disables printing an IPX banner page through Printer Job Language (PJL).
0
disables banner pages.
1
(default) enables banner pages.
pjl-eoj
(ipx-eoj)
Enables or disables IPX end-of-job notification through PJL.
0
disables,
1
(default)
enables.
pjl-toner-low
(ipx-toner-low)
Enables or disables IPX toner-low notification through PJL.
0
disables,
1
(default)
enables.
AppleTalk
appletalk
Enables or disables AppleTalk (EtherTalk) protocol operation on the print server. 0
disables, 1 (default) enables. For example,
appletalk 0
will disable AppleTalk operation
Name
(Read-only parameter) The name of the printer on the AppleTalk network. A number
after the name indicates that there are multiple devices with this name, and this is the
Nth instance of the name.
Print Type
(Read-only parameter) Specifies the AppleTalk network printer type reported by the
Jetdirect print server. Up to three print types may be reported.
Zone
(Read-only parameter) The name of the AppleTalk network zone on which the printer is
located.
Phase
(Read-only parameter) AppleTalk phase 2 (P2) is preconfigured on the HP Jetdirect
print server.
Status
(Read-only parameter) Indicates the current AppleTalk configuration status.
READY
: Indicates the HP Jetdirect print server is awaiting data.
DISABLED
: Indicates that AppleTalk was manually disabled.
INITIALIZING
: Indicates that the print server is registering the node address or name.
An additional status message may also be displayed.
DLC/LLC
dlc/llc-config
Enables or disables DLC/LLC protocol operation on the print server.
0
disables,
1
(default) enables. For example,
dlc/llc-config 0
will disable DLC/LLC operation.
Table 3-3
Telnet Commands and Parameters (continued)
54
Chapter 3 TCP/IP Configuration
ENWW
Summary of Contents for 635n
