HP 635n, Administrator'S Manual

Page: 84 / 194

Item Description
System Location (IPv4 or IPv6) Specifies the physical location of the device or related information.
Only printable ASCII characters are allowed, up to 64 characters.
When configured, this parameter will be displayed on the HP Jetdirect home page.
Proxy Server
(For printers/MFPs that support this feature)
(IPv4 only) Specifies the proxy server to be used by embedded applications in your
printer/MFP. A proxy server is typically used by network clients for Internet access. It
caches Web pages, and provides a degree of Internet security, for those clients.
To specify a proxy server, enter its IP address or fully-qualified domain name. The
name can be up to 64 characters.
For some networks, you may need to contact your Independent Service Provider
(ISP) for the proxy server address.
Proxy Server Port (For printers/MFPs that support this feature)
(IPv4 only) Enter the port number used by the proxy server for client support. The
port number identifies the port reserved for proxy activity on your network, and can
be a value from 0 to 65535.
Proxy Server User Name (For printers/MFPs that support this feature)
(IPv4 only) If a user account on the proxy server has been set up, enter the name of
the user account.
Proxy Server Password (For printers/MFPs that support this feature)
(IPv4 only) If a user account on the proxy server has been set up, enter the
password of the user account.
Proxy Server Exception List (For printers/MFPs that support this feature)
(IPv4 only) Enter Web addresses, host names, or domain names that do not need to
be accessed through the proxy server. Use semicolons (;) to separate entries.
TTL/SLP (IPv4 only) Specifies the IP multicast Time To Live (TTL) discovery setting for
Service Location Protocol (SLP) packets. The default value is 4 hops (the number of
routers from the local network). The range is 1–15. If set to
− 1, multicast capability is
disabled.
For print servers configured for Auto IP (link-local) addresses, this field will be
ignored. TTL on outbound packets will always be set to 255 and limited to the link-
local network.
Syslog Server (IPv4 only) Specifies the IP address of a host computer that is configured to receive
syslog messages from the HP Jetdirect print server. If a Syslog Server is not
specified, syslog messages are disabled.
Syslog Maximum Messages (IPv4 only) Specifies the maximum number of syslog messages that can be sent by
the HP Jetdirect print server on a per-minute basis. This setting allows administrators
to control the log file size. The default is 10 per minute. If set to zero, no maximum
number is defined.
Syslog Priority (IPv4 only) Controls the filtering of syslog messages that are sent to the syslog
server. The filter range is 0 to 8, with 0 being the most specific and 8 being the most
general. Only messages that are lower than the filter level specified (that is, higher in
priority) are reported. The default value is 8 which reports all syslog messages. A
value of zero effectively disables syslog reporting.
Table 4-8 TCP/IP Advanced tab (continued)
74 Chapter 4 HP Jetdirect Embedded Web Server (V.31.xx) ENWW