HP 6125XLG Command Reference Manual Download Page 94

Page: 94 / 466

Len : 32

Options : NP

Seq# : 80000003

Checksum : 0x2a77

Net Mask : 255.255.255.0

Attached Router 192.168.1.1

Attached Router 192.168.1.2

Table 22

Command output

Field Description

Type LSA

type.

LS ID

DR IP address.

Adv Rtr

Router that advertised the LSA.

LS Age

LSA age time.

Len LSA

length.

Options

LSA options:

•

—Opaque LSA advertisement capability.

•

—AS External LSA reception capability.

•

—External extended LSA reception capability.

•

—On-demand link support.

•

—NSSA external LSA support.

•

—Capability of an NSSA ABR to translate Type-7 LSAs into Type-5 LSAs.

Seq#

LSA sequence number.

Checksum LSA

checksum.

Net Mask

Network mask.

Attached Router

ID of the router that established adjacency with the DR, and ID of the DR itself.

display ospf peer

Use

display ospf peer

to display information about OSPF neighbors.

Syntax

display ospf

[

process-id

]

peer

[

verbose

]

[

interface-type interface-number

]

[

neighbor-id

]

Views

Any view

Predefined user roles

network-admin
network-operator

Parameters

process-id

: Specifies an OSPF process by ID in the range of 1 to 65535.

verbose

: Displays detailed neighbor information.

Summary of Contents for 6125XLG



















































































































































































































































































































































































































































































Search results

Summary of Contents for 6125XLG

Reviews:

Related manuals for 6125XLG

Brands by name

Popular brands

HP 6125XLG, Command Reference Manual

Search results

Summary of Contents for 6125XLG

Reviews:

Related manuals for 6125XLG

Brands by name

Popular brands