9
Parameters
vpn-instance
vpn-instance-name
: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
prefix-list-name
: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63 characters.
verbose
: Displays detailed information about all routes permitted by the IP prefix list. Without this
keyword, the command displays brief information about active routes permitted by the IP prefix list.
Usage guidelines
If the specified IP prefix list does not exist, the command displays information about all routes.
Examples
# Create an IP prefix list named
test
to permit the route 1.1.1.0/24.
<Sysname> system-view
[Sysname] ip prefix-list test permit 1.1.1.0 24
# Display brief information about the active route permitted by the IP prefix list.
[Sysname] display ip routing-table prefix-list test
Routes Matched by Prefix list : test
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
1.1.1.0/24 Direct 0 0 1.1.1.2 Vlan22
For command output, see
Table 1
.
# Display detailed information about all routes permitted by the IP prefix list.
[Sysname] display ip routing-table prefix-list test verbose
Routes Matched by Prefix list : test
Summary Count : 1
Destination: 1.1.1.0/24
Protocol: Direct Process ID: 0
SubProtID: 0x1 Age: 04h20m37s
Cost: 0 Preference: 0
Tag: 0 State: Active Adv
OrigTblID: 0x0 OrigVrf: default-vrf
TableID: 0x2 OrigAs: 0
NBRID: 0x10000003 LastAs: 0
AttrID: 0xffffffff Neighbor: 0.0.0.0
Flags: 0x1008c OrigNextHop: 1.1.1.2
Label: NULL RealNextHop: 1.1.1.2
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: Vlan-interface22
BkTunnel ID: Invalid BkInterface: N/A
For command output, see
Table 2
.
