HP 6125XLG Command Reference Manual Download Page 446

Page: 446 / 466

435

Parameters

basic-comm-list-num

: Specifies a number for the basic community list, in the range of 1 to 99.

basic

: Specifies a name for the basic communist list.

advanced

: Specifies a name for the advanced communist list.

basic-comm-list-name

: Specifies the basic community list name, a case-sensitive string of 1 to 63

characters that cannot comprise only letters.

adv-comm-list-name

: Specifies the advanced community list name, a case-sensitive string of 1 to 63

characters that cannot comprise only letters.

adv-comm-list-num

: Specifies the advanced community list number in the range of 100 to 199.

regular-expression

: Specifies a regular expression for the advanced community list, a string of 1 to 63

characters. For more information about regular expressions, see

Fundamentals Configuration Guide

deny

: Specifies the match mode for the community list as

deny

permit

: Specifies the match mode for the community list as

permit

community-number

&<1-32>: Specifies a community sequence number in the range of 1 to 4294967295.

&<1-32> indicates that the argument before it can be entered up to 32 times.

aa:nn

&<1-32>: Specifies a community number. Both

and

are in the range of 0 to 65535. &<1-32>

indicates that the argument before it can be entered up to 32 times.

internet

: Specifies the INTERNET community attribute. Routes with this attribute can be advertised to all

BGP peers. By default, all routes have this attribute.

no-advertise

: Specifies the NO_ADVERTISE community attribute. Routes with this attribute cannot be

advertised to other BGP peers.

no-export

: Specifies the NO_EXPORT community attribute. Routes with this attribute cannot be

advertised out of the local AS or the local confederation but can be advertised to other ASs in the

confederation.

no-export-subconfed

: Specifies the NO_EXPORT_SUBCONFED community attribute. Routes with this

attribute cannot be advertised out of the local AS, or to other sub-ASs in the local confederation.

Examples

# Configure basic community list 1 to permit routing information with the INTERNET community attribute.

<Sysname> system-view

[Sysname] ip community-list 1 permit internet

# Configure advanced community list 100 to permit routing information with the COMMUNITY attribute
starting with 10.

<Sysname> system-view

[Sysname] ip community-list 100 permit ^10

Related commands

•

apply comm-list delete

•

apply community

•

display ip community-list

•

if-match community

Summary of Contents for 6125XLG



















































































































































































































































































































































































































































































Search results

Summary of Contents for 6125XLG

Reviews:

Related manuals for 6125XLG

Brands by name

Popular brands

HP 6125XLG, Command Reference Manual

Search results

Summary of Contents for 6125XLG

Reviews:

Related manuals for 6125XLG

Brands by name

Popular brands