HP Latex Cutter Extended Kit
This kit contains the following items:
●
Sandblast blades and holder
Sandblast blades are used for some very specific applications such as gravestones. These blades need a
special blade holder.
●
Pouncing kit, pin, and strip
The pouncing pin can be used if you prefer to pierce the substrate instead of cutting it. It comes together
with a pouncing kit and a cutting strip.
●
Black pen and pen holders
The pen can be used if you want to use the contour cutter as a drawing device. It comes with two pen
holders.
Set the tool type
The cutter is supplied with a knife, and alternative tools are available as accessories. All tools have one
parameter in common: the pressure. Other parameters are specific to the tool. Tool parameters can be changed
by changing them for the current user, or by changing the user.
NOTICE:
The cutter will perform as specified only if a genuine HP tool is installed. Do not replace the standard
knife with products from other manufacturers.
1.
Turn on the cutter.
2.
Press
.
3.
Press
or
until you reach Tool. Press
.
4.
Press
or
to change the tool.
5.
Press
to confirm. An asterisk appears by the name of the tool, indicating that it is now selected.
6.
Press
twice to leave the menu.
50
Chapter 8 Accessories
ENWW
Summary of Contents for 54 Basic Cutter
Page 1: ...HP Latex Cutter Series User Guide ...
Page 37: ...ENWW Introduction 33 ...
