3.
Connect the other end of the cable to the USB port at the back of the cutter. This end of the cable should
have a 4-pin USB series B connector.
4.
Turn on the cutter (see
Turn the cutter on and off on page 8
).
Most cutting software for Mac OS X can control the cutter without the installation of a driver.
Front panel
The front panel features eight command keys and a display area capable of displaying one line of text, which is
used to display menu options and status information.
A parameter or parameter value preceded by an asterisk (*) is the currently selected parameter or parameter
value. If you see a value displayed without an asterisk, it is not the saved value.
The various menu and submenu items are always presented in a loop, which means that, when the last menu or
submenu item is displayed, pressing the appropriate key will automatically take you back to the first item of the
same menu or submenu.
WARNING!
Whenever you press a key, it may initiate an internal test or movement of the head or substrate.
Keep fingers and other body parts away from the cutting area, where there are hazardous moving parts.
Keys
●
Press
to reach the most common menu items quickly.
●
Press
to read the HP barcode.
●
The use of the arrow keys
,
,
, and
depends on the context and what appears on the
screen.
●
Press
to cancel the current process.
●
Press
to confirm a selection or a changed value, or to start or pause a job.
ENWW
Front panel
9
Summary of Contents for 54 Basic Cutter
Page 1: ...HP Latex Cutter Series User Guide ...
Page 37: ...ENWW Introduction 33 ...
