HP 1x1x16 - IP Console Switch KVM, User Manual

Page: 239 / 339

Using the on-board Web interface (OBWI) 239
Configuring tiered switches
1.
Click the Configure tab.
2.
Select the Servers category, and then select the Cascade Devices subcategory.
3.
Select the name of the console switch.
4.
(Optional) Enter the new name of the console switch.
5.
Enter the number of channels on the console switch. (Acceptable values are from 4 to 24.)
6.
Click Save.
Interface adapters
The IAs subcategory under the Servers heading lists the interface adapters in the system and provides
information such as the port ID, EID, interface adapters type, connection device, and connection status.
The Clear Offline Interface Adapters button enables a Console Switch Administrator to remove an offline
interface adapter from the list. User access rights are updated at the same time to remove the servers
associated with the cleared interface adapter. However, you cannot clear an interface adapter if it is
connected to a tiered analog console switch.
The Interface Adapter Language menu enables a Console Switch Administrator to set the language and
keyboard parameters for all Sun/USB interface adapters on a console switch.