Horizon Reverse Osmosis Seafari Versatile SFC-1400-2, Owner'S Manual

Page: 57 / 162

HRO
Systems
Horizon
Seafari
Self Contained and Modular Style
15. Open the Back Pressure Regulator Valve [33] FULL
OPEN by turning counter clockwise.
Page F -
6
CAUTION: The Back Pressure Regulator Valve
[33] must be full open when starting the Horizon
Seafari System. If this valve is left closed, it may
cause extensive damage to the system.
16. Switch the Electrical Power Source to the Salinity
Controller "ON".
17. ELECTRIC MOTOR ROTATIONAL CHECK: Ask
an assistant to view the fan section of the Electric
Motors, (High Pressure Pump Electric Motor [25]
and Booster Pump Electric Motor [5]) while you Jog
the System.
Press the “Booster Pump” switch, then the “Start” switch,
and finally the “Stop” switch. Ensure that the High
Pressure Pump Electric Motor and the Booster Pump
Electric Motor turned in the proper rotation. If either or
both motors turned in the wrong direction refer to the
wiring diagrams in
APPENDIX A to correct.
18. Multi Media Filter Preparation.
The Multi Media Filter should be loaded with gravel
and #20 silica sand. When new, the media must be
back washed then rinsed prior to use. These
procedures fluff and clean the silica sand base.
During back washing the suspended solids are
discharged. Follow the Backwashing Instructions on
Page K – 5 .
When Backwashing is complete, make sure to
position the Multi Media Filter Valves for Normal
Operation.
HIGH PRESSURE PUMP & MOTOR:
BOOSTER PUMP & MOTOR: