Horizon Reverse Osmosis Seafari Versatile SFC-1400-2, Owner'S Manual

Page: 49 / 162

HRO
Systems
Horizon
Seafari
“Section E” Installation
20. U.V. Sterilizer [45]: (optional) is the last Product
Water component prior to the Product Water Storage
Tank.
Mount the U.V. Sterilizer in a vertical position, with
the Inlet port at the bottom and the Outlet at the top.
Horizontal mounting is also acceptable and either
port may act as the Inlet or Outlet if mounted
Horizontally.
The UV sterilizer should be mounted to a flat surface
with the supplied two mounting saddles.
Using the supplied 3/8” O.D. tubing connect the
Inlet (bottom if mounted vertically) to the Outlet of
the Charcoal Filter.
21.
Product Water Storage Tank Connector: is a
black 3/8” O.D. elbow tube fitting with 3/8” male
pipe thread.
The easiest mounting method is to create a 3/8”
female national pipe thread in the Ship’s Product
Water Storage Tank Fill Line or in the top of the
tank itself. Using the supplied 3/8” tubing, connect
the outlet of the Charcoal Filter to the connector.
If a U.V. Sterilizer is the final post-filtration
component, connect the outlet of the U.V. to the
product water storage tank connector.
22.
Brine Thru Hull Fitting [37] must have a 1/2"
MNPT nipple fitting inside the hull for connection of
the Brine Discharge Tee [36]. It must be above Sea
Level.
23. Clean/Rinse Outlet Valve [35] This optional valve is
used with the Inlet Clean/Rinse Valve #4 to assist in
rinsing and cleaning of the System.
Install the Outlet Clean/Rinse Valve between the
Brine Discharge and the Brine Discharge Tee
Connector [36]. Using the Supplied 1/2 inch O.D.
Tubing.
Connect one side port of the Outlet Clean/Rinse
Valve to the Brine Discharge Tee Connector [36].
Connect the other side port to a Clean/Rinse Tank
[50] Return or to a length of hose that can later be
placed into a temporary Clean/Rinse Tank,
Container or Bucket.
Connect the Center port to the Brine Discharge Tee
Connector [36].
From System Brine
Discharge (½” Tube)
To Clean/Rinse Tank
Return (½” Tube)
To Brine Discharge Fitting [36]
(½” Tube)
Page E - 17