Horizon Reverse Osmosis Seafari Versatile SFC-1400-2, Owner'S Manual

Page: 35 / 162

HRO
Systems
Horizon
Seafari
“Section E” Installation
Page E - 3
Keep the product water tubing as straight and short
as possible.
Do Not Install Any Valves in this line. Blockage
of the Product Water Line causes extensive
damage to the System and the R.O. Membrane
Element.
G. UNCRATING:
DO NOT DISCARD ANY PACKAGING
MATERIAL UNTIL YOU HAVE FOUND AND
IDENTIFIED ALL PARTS!
Remove the Horizon Seafari system from the
shipping crate.
Some of the components are loose or separately
packaged in the shipping container.
Do Not discard any packaging or boxes as they
may contain small mounting hardware pieces or
small system components.
H. HIGH PRESSURE PUMP PREPARATION:
1. Remove the orange shipping plug from the high-
pressure pump and replace with the orange, vented
cap.
It is very important that the vented cap is installed
or pressure builds up within the pump crankcase,
which may lead to pump damage
2. Ensure that the pump oil level is at the center of the
pump sight glass.
The pump oil must be filled with HRO Systems
supplied pump oil.
Location of Oil Sight Plug.
(Pump oil must be filled to middle of
glass prior to operation.)
Supplied Orange-Colored Vented
Oil Fill Cap Must Be Installed
Prior to Use.
Feed Water Inlet to High Pressure
Pump (From Pre-filter or Oil/Water
Separator)
High Pressure Hose
Connection (To R.O.
Membrane Inlet)
INSTALLATION
KIT
MODULAR SYSTEMS PACKAGED COMPONENTS
(NO OPTIONS SHOWN)
Pre-filters
Booster Pump
Main System
INSTALLATION
KIT
Pre-filters
Main System
Booster Pump
High-Pressure
Pump
Controller
Main Power
Enclosure
SELF-CONTAINED SYSTEMS PACKAGED COMPONENTS
(NO OPTIONS SHOWN)