Horizon Reverse Osmosis Seafari Versatile SFC-1400-2, Owner'S Manual

Page: 14 / 162

HRO
Systems
Horizon
Seafari
Specifications
DIMENSIONS & WEIGHT:
MODEL WEIGHT MODEL WEIGHT
HRO SFC 450-1
147 lbs / 67 kg HRO SFM 450-1 113 lbs / 51 kg
HRO SFC 900-2 159 lbs / 72 kg HRO SFM 900-2 125 lbs / 57 kg
HRO SFC 700-1 150 lbs / 68 kg HRO SFM 700-1 116 lbs / 53 kg
HRO SFC 1400-2 165 lbs / 75 kg HRO SFM 1400-2 131 lbs / 59 kg
HRO SFC 900-1 152 lbs / 69 kg HRO SFM 900-1 118 lbs / 54 kg
HRO SFC 1800-2 170 lbs 77 kg HRO SFM 1800-2 136 lbs / 62 kg
EXTERNAL INSTALLATION WATER CONNECTIONS: Pipe sizes to be supplied by the installer for
connection of the Sea Recovery supplied components
Feed Inlet: 3/4 MNPT (Male National Pipe Thread, American Standard).
Brine Discharge 1/2 FNPT (Male National Pipe Thread, American Standard).
Product 3/8 FNPT (Female National Pipe Thread, American Standard)
CAUTION:
The Horizon Seafari Reverse Osmosis Desalination Systems are designed to be as electrically
efficient as possible. RPM supplied to and Pressure created by the High Pressure Pump govern the amount of
energy required by the High Pressure Pump’s Electric Motor. In order to maintain a sufficient flow of feed
water into the Reverse Osmosis Membrane Element, Horizon Seafari utilizes several different High Pressure
Pumps with different displacement characteristics. These different High Pressure Pumps, in turn, have
different power requirements.
As such, several different Electric Motors are used in the Horizon Seafari Systems. In order to maintain
maximum operational versatility HRO Seafari Systems utilize dual Cycle (Hz) Electric Motors capable of
operating from both 50 Hz and 60 Hz.
In a Boat application, use caution when switching from your auxiliary AC on board generator to shore power.
In many cases, due to insufficient wiring or long distances from the power source to the end of the dock, shore
power from a Marina may be insufficient to operate your Horizon Seafari System. Low voltage to the Horizon
Seafari System causes damage to the electric motor. Damage caused to the system due to low voltage is not
covered by Warranty.
Page B - 3