![Horizon Reverse Osmosis Seafari Versatile SFC-1400-2 Owner'S Manual Download Page 46](http://html1.mh-extra.com/html/horizon-reverse-osmosis/seafari-versatile-sfc-1400-2/seafari-versatile-sfc-1400-2_owners-manual_2163420046.webp)
HRO
Systems
Horizon
Seafari
Self Contained and Modular Style
Page E - 14
9.
Multi Media Filter
[7] (optional) is supplied pre-
mounted to its own base. Mount the Multi Media
Filter base onto a flat horizontal surface and secure
the base in place using the supplied mounting
hardware. Mount the assembly below water level to
minimize feed pressure loss.
10.
Standard Pre-filter [12]:
Must be mounted against a flat vertical surface
using the supplied hardware.
It is preferable to mount the Standard Pre-filters
in a straight line with and in close proximity to
the Booster Pump.
Allow minimum 4" below the bottom of the bowl
for Pre-filter Element removal.
Connect the inlet to the Booster Pump Outlet or
Fresh Water Flush Outlet.
Connect the Outlet to the Commercial Pre-filter
Inlet. Connect the Media Filter Waste Discharge
Fitting [10] to the Over Board Dump Waste
Fitting [11].
Unscrew the Multi Media Fill Plug, located on
top of the Multi Media Filter Lid. Place a funnel
over the Fill Hole. Pour into the funnel
approximately 15 lbs (7 kg) of small gravel (1/8
x 1/4 inch) first (on the bottom) then
approximately 26 lbs (12 kg) of #20 silica sand
last (on top of the small gravel). Remove the
funnel and clean the Fill Plug female threads.
Screw the Fill Plug back onto the Lid and tighten
lightly with a wrench. Note this Fill Plug is O-
ring sealed and requires only light tightening to
seal the O-ring.
Multi-Media Filter
Inlet from Booster Pump or
Fresh Water Flush.
Outlet of Multi-Media Filter
to Prefilter Inlet.
Waste Discharge of
Multi-Media Filter to
Overboard Dump
Fitting.
In line Low
Pressure
Pick Up Tee
(See also #14)
Standard Pre-filter
Outlet
(To High Pressure
Pump Inlet)
Tee one end of
Pressure Pick Up to
Outlet Gauge of
Pre-filtration Unit
Tee opposite end of
Pressure Pick Up to
System Low Pressure
Gauge
Standard Pre-filter
Inlet
(From Booster
Pump)
See also Item #14 (page E – 16) for close up of the Low
Pressure Pick Up Tee.
Backwash Multi-Media Filter before operating
the system.
Summary of Contents for Seafari Versatile SFC-1400-2
