horiba GA-370, Instruction Manual

Page: 52 / 95

3 Operations
36
3.7 Stopping the analyzer
Stop the analyzer with the following procedure.
Operating procedure
1.
Press the [SHUTDOWN] button ( ) in the MEASUREMENT screen.
The SYSTEM SHUTDOWN screen appears.
2.
Press the [SHUTDOWN] button.
Fig. 37 SYSTEM SHUTDOWN screen
3.
Press the [YES] button in the confirmation message screen.
The system shuts down.
Fig. 38 Confirmation message screen (system shutdown)
4. Stop the gas.
5.
Turn OFF the power switch.
Note

If the power switch is turned off without performing the system shutdown operation, any setting
values that are being updated may not be recorded.

The system cannot be shut down while the key lock is set.
Unlock the keys.

When span gas is being introduced, stop the introduction and then wait about 1 minute before
stopping the analyzer.