horiba GA-370, Instruction Manual

Page: 29 / 95

2 Preparations
13
2.7.2 How to change the key lock state
Operating procedure
1.
Press the key lock button ( ).
The KEY LOCK setting screen appears.
2.
Select the key lock state to set and then press [OK].
The setting is updated and the MEASUREMENT screen reappears.
At that time, the PASSWORD input screen appears if you select KEY UNLOCK.
Fig. 10 KEY LOCK setting screen
3.
Enter the password and then press [Enter].
If the entered password is correct, the setting is updated and the MEASUREMENT screen
reappears.
Fig. 11 KEY UNLOCK Input screen
Tip
If the password is set to "000000", the keys can be unlocked by just pressing [Enter] without
entering the password.