horiba GA-370, Instruction Manual

Page: 23 / 95

2 Preparations
7
2 Preparations
This chapter specifies the installation conditions and describes the tube and cable
connections.
2.1 Contact for installation
2.2 Installation conditions
This analyzer is designed to be used under ordinary environmental conditions so
consideration has not been given to use under special conditions.
Install the analyzer in a location that meets the following conditions.

Location sheltered from rain and water drops

Location with an ambient temperature of 0°C to 40°C that is not subject to sudden
temperature changes of 5

C or more.

Location not directly exposed to heat from direct sunlight or a heater

Location with little dust

Location with little vibration

Location free from powerful electric and magnetic fields

Location where corrosive gas is not present in the atmosphere

Location with relative humidity of 85% or less

Location where maintenance space can be provided
Maintenance needs to be performed from the front, rear and top. Furthermore, a
ventilation fan is provided to prevent the temperature inside the case from rising. Provide
space from the walls for the ventilation fan.

Location indoors

Supply voltage fluctuations: ±10% of reference voltage (up to 250 V)

Power frequency: within ±1% of reference frequency

Installation environment of main power source conforming to overvoltage category II and
pollution degree 2

Altitude of 3000 m or less

Placed on a level surface or fixed to a rack

Air inlets and exhaust outlet are not blocked
Leave a space of at least 10 mm from the wall.
Manufacturer: HORIBA, Ltd.
2 Miyanohigashi, Kisshoin Minami-ku, Kyoto 601-8510 Japan