horiba GA-370, Instruction Manual

Page: 45 / 95

3 Operations
29
3.4 Measurement
After calibration of the analyzer is completed, carry out measurement.
3.4.1 MEASUREMENT screen
There are two display types for measurement: measurement value display and graph display.
The display can be changed with the display change button.
When a measurement value is outside the measurement range, the range indication flashes.
Fig. 28 MEASUREMENT screen (measurement value and graph display)
Table 12 Various names and functions (MEASUREMENT screen)
No. Name Description Reference
1 Display change buttons
Switches between measurement value display and graph
display in the MEASUREMENT screen.
: Switches to graph display.
: Switches to measurement value display.
―
2 Bar
The display color differs depending on the gas being
measured.
Blue: Measure mode is selected.
Pink: CALIBRATION mode and DELAY mode are
selected.
―
3 Measurement values
Displays the measurement component names and
measurement values.
―
4 RANGE
Displays the current range state of each component.
If a numerical value is flashing in red, this indicates that
the measurement value is outside of the measurement
range.
: Auto range is set.
: Range switching input from an external device is set.
page 31
5
Time setting button
(Display time selector)
Sets the time of the horizontal axis of the graph.
Settable times: 3 minutes, 15 minutes, 30 minutes, and
60 minutes
page 33
1 1 4 3
3
5
6
<Measurement value display> < Graph display>
2 2