Honeywell Vertex M, Technical Handbook

Page: 205 / 250

Vertex M
TM
24-Point Continuous Monitor
Appendix A - Network Interface and Options F-8
Folder Tag Count
Recommended
for most HMI
systems
Tag Name
Format
Value Interpretation / Description
Maintenance 0
CFilter 9 Az#FiltDaysLeft
Integer, number of days until filters should be changed, equivalent to
“Filter Left” as displayed in Diagnostics/Anlyzer Info.
Reset 0
Monitor 9 Y Az#
Integer monitoring state for entire analyzer , see table below
0 = Idle
1 = Pyrolyzer Warmup
2 = Monitoring
3 = Loading Chemcassette
4 = Loading new program
5 = Loading new configuration
6 = Flow auto-balance
7 = Performing Line Integrity Test
SGas_Name 72 ##_1 String gas name abbreviation, e.g. “AsH3”
Unit 72 ##_1 String, either “ppm” “ppb” or “mg/m3”
Note:
The Vertex M uses the same OPC server as the Vertex. Thus numerous OPC tags exist for non-existent analyz-
ers. Tags for points greater than 24 or analyzers greater than 3 are not populated and invalid.
Table F-3. Tag Names (continued)