OPERATION
6
71
SMARTLINE® RM60 (FMCW)
www.honeywell.com/ps
34-VF-25-31 iss.4 GLO December 15 US
Enter the supervisor mode to either:
•
Do an error status check, or
•
Read the error records and get more data about the error.
How to check the measurement quality
•
Enter supervisor mode.
•
Go to Test > Information > Measurement Quality
Test > Information > Measurement Quality
Test > Information > Measurement Quality
Test > Information > Measurement Quality.
i
This shows the status of device errors at this time. A "tick" symbol next to an error in the
list shows that this error is active and may have an unwanted effect on the device.
•
For solutions to the problem, refer to
Error handling
on page 73.
Figure 6-9: Indication of errors
1
Error/ warning symbol
Figure 6-10: Measurement quality in supervisor mode
1
Type of error.
2
Error "active"
Summary of Contents for SmartLine RM60
