manualshive.com logo in svg

Honeywell SmartLine RM60, Handbook

Share
Download
Honeywell SmartLine RM60 Handbook Download Page 43

 START-UP 

5

43

SMARTLINE® RM60 (FMCW)

www.honeywell.com/ps

34-VF-25-31 iss.4 GLO December 15 US

5.3.3  Help screens

When you are in supervisor mode, the local display helps you to configure the device. If you do 
not touch any keys after 30 seconds, a help message is displayed. This will explain what the 
menu is and what the parameters do. Push [>>>>] and [

] (Esc) at the same time to go back to the 

menu. If you do not touch the display for another 30 seconds, the message is shown again.

5.3.4  How to start the device

•  

Connect the converter to the power supply.

•  

Energize the converter.

i

After 30 seconds the screen will display "booting up", "starting  up" and then the default 
screen will appear.

•  

The device will display readings.

i

Measurements agree with specifications given in the customer order.

5.4  Remote communication with PACTware

™

PACTware

™

  displays measurement information clearly on a computer (PC) and lets you 

configure the device from a remote location. It is an Open Source, open configuration software 
for all field devices. It uses Field Device Tool (FDT) technology. FDT is a communication standard 
for sending information between the system and the field device. Field devices are easily 
integrated. Installation is supported by a user-friendly Wizard.

Install these software programs and equipment:

•

Microsoft

®

 .NET Framework version 1.1 or later.

•

PACTware.

•

HART

®

 converter (USB, RS232...).

•

The Device Type Manager for the device.

The software and installation instructions are given on the DVD-ROM supplied with the device.

You can also download the latest version of PACTware

™

 and the DTM from our internet site.

Refer also to the PACTware

™

 consortium site at http://www.pactware.com.

CAUTION!

If the manufacturer received information about the installation, the device will display readings 
correctly. If not, refer to the quick setup procedures on page 53

.

Summary of Contents for SmartLine RM60

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands