manualshive.com logo in svg

Honeywell PM23c, User Manual, Page: 97 / 164

Share
Download
Honeywell PM23c User Manual Download Page 97

Chapter 5 – Troubleshoot the Printer

PM23c, PM43, and PM43c Mid-Range Printer User Manual

87

Faulty Dot

The printhead has reached the number of faulty 
dots set in the Faulty Dots setting in Maintenance 
Alerts. You may need to replace the printhead.

Replace Printhead

The printer has reached a limit set in the Replace 
Printhead setting in Maintenance Alerts for the 
amount of media to print before replacing the 
printhead. Replace the printhead.

Clean Printhead

The printer has reached a limit set in the Clean 
Printhead setting in Maintenance Alerts for the 
amount of media to print before cleaning the 
printhead. Clean the printhead. 

No RFID Tag Found The printer can not find an RFID tag.

RFID Not Installed

You are attempting to write to a tag, but the printer 
does not support RFID. You must install the RFID 
module in the printer to be able to write to RFID 
tags.

Upgrading Firmware The printer is going to start upgrading the 

firmware. Do not try to send anything to the 
printer.

Printer is Rebooting

The printer is going to restart. Wait until the printer 
is ready before attempting to communicate with it.

Started

The printer is in the process of starting up.

Motor Too Hot

The printer motor has reached its maximum 
operating temperature limit. Let the motor cool 
down before you resume printing.

Maintenance and Error Alerts (continued)

Error Alert

Solution

Summary of Contents for PM23c





































































































































































Reviews:

No comments