Honeywell PM23c User Manual Download Page 84

Page: 84 / 164

Chapter 4 – Configure the Printer

PM23c, PM43, and PM43c Mid-Range Printer User Manual

Install a Configuration File from a USB
Storage Device

After you save an .xml configuration file to a USB storage device, you can
install it on the printer at any time.

Insert the USB storage device in the printer USB host port.

From the Ready screen, press the

Main Menu

button. The Main Menu

appears.

Select

Tools > USB Menu

Select

Configuration

Select

Install Configuration

. The printer imports the configuration

file.

•

For most printer languages, the configuration file is imported
directly into the working configuration and is not copied to the /
config directory.

•

An IPL configuration file is copied to /home/user/config/ipl.

Press

when the confirming message appears.

Programming Commands to Load a Printer Profile

Connection

Programming Commands

Printer running
Fingerprint

RUN “/system/usr/bin/cfg -o xmlimportset -k /home/
user/profiles/myprofile”

Printer running
IPL

<STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset
-k /home/user/profiles/myprofile<ETX>

Telnet connection
over Port 23

/system/usr/bin/cfg -o xmlimportset -k /home/user/
profiles/myprofile

Note:

If there is more than one configuration file on the USB storage

device, the printer imports the first file found in alphabetical order by file
name.

Summary of Contents for PM23c





































































































































































Search results

Summary of Contents for PM23c

Reviews:

Honeywell PM23c, User Manual, Page: 84 / 164

Search results

Summary of Contents for PM23c

Reviews: