manualshive.com logo in svg

Honeywell PM23c, User Manual, Page: 22 / 164

Share
Download
Honeywell PM23c User Manual Download Page 22

Chapter 1 – About the Printer

12

PM23c, PM43, and PM43c Mid-Range Printer User Manual

About the Main Menu

In the printer Ready screen, press 

 to view the Main Menu.

Press one of the buttons to select the Programs, Settings, Tools, or 
Wizards menu:

•

Select 

Programs

 to see a list of programs installed on the printer. 

This list includes utility programs provided by Intermec as part of the 
printer firmware, and programs you have installed on the printer.
The 

Programs

 item appears in the Main Menu only if the printer is 

using Fingerprint or Direct Protocol as the command language.

•

Select 

Settings

 to view and change printer settings.

•

Select 

Tools

 to print test labels, manage a connected USB storage 

device, restore printer default settings, or save and load printer 
profiles.

•

Select 

Wizards

 to see a list of wizards that help you configure printing 

or communication settings, or calibrate the media sensors.

Note:

 If you create menu shortcuts, the Main Menu is replaced by the 

Quick Choices menu.

Note:

 The printer cannot print while the Main Menu is onscreen. You 

need to exit the Main Menu and return to the Ready screen to begin 
printing.

Summary of Contents for PM23c





































































































































































Reviews:

No comments