Wireless Mesh Configuration
Setting up wireless networks
R110
OneWireless Multinode User's Guide
87
6/08
Step
Action
6
Choose the
Tx Pwr Mode
from the drop down menu.
Note: The Tx Pwr Mode can be set to AUTO unless the power must be
regulated. If FIXED is selected, you then must choose the Fixed Power Level
from the drop down menu. See Table 11 for more information.
7
Choose the
Propogation Distance
from the drop down menu.
Note: This field is set based on the distance between a mesh node and the
furthest mesh node that is connected to it.
8
Choose the RTS Threshold. See Table 11 for more information on this
option.
9
Choose the value for Beacon Interval. See Table 11 for more information on
this option.
10
After you have entered the information in the fields, click
Apply
to accept the
values.
11
Enter a descriptive note to identify the remote mesh node or its location.
12
Click
Add
button.
Select mesh mode:
Step
Action
1
Click on the
Wireless Mesh
- General
at the left of the screen to call up the
General configuration screen.
2
Select either Manual Mesh or Auto Mesh. The screen will refresh according
to the Mesh mode that was selected.
3
•
If Auto Mesh is selected, go to
Complete Auto Mesh
on page 88 and
follow the procedure.
•
If Manual Mesh is selected, go to
Complete Manual Mesh
on page 89 and
follow the procedure.
Summary of Contents for OW-CDX050
Page 1: ...OneWireless Multinode User s Guide OW CDX050 R110 6 08 ...
Page 24: ...Agency compliance information R TTE Directive 12 OneWireless Multinode User s Guide R110 6 08 ...
Page 82: ...Configuration System Administration 70 OneWireless Multinode User s Guide R110 6 08 ...
Page 134: ...Honeywell International Process Solutions 2500 West Union Hills Phoenix AZ 85027 ...