Wireless Mesh Configuration
Setting up wireless networks
94
OneWireless Multinode User's Guide
R110
6/08
Repeater network configuration
A repeater network can be used to extend the wireless signal from one mesh node
connected to an Ethernet LAN wirelessly so that another mesh node can control a
wireless LAN at a distance. With this configuration, each mesh node can control a
wireless LAN. All wireless clients must have the same SSID as the mesh node on the AP
card channel. All clients can roam between the three mesh nodes. The option settings in
Table 17 and Table 18 are used when setting up a repeater network configuration as
shown in Figure 13. Use the procedure
To set up wireless mesh
on page 86 to set up the
network.
Figure 13 Repeater network example
Summary of Contents for OW-CDX050
Page 1: ...OneWireless Multinode User s Guide OW CDX050 R110 6 08 ...
Page 24: ...Agency compliance information R TTE Directive 12 OneWireless Multinode User s Guide R110 6 08 ...
Page 82: ...Configuration System Administration 70 OneWireless Multinode User s Guide R110 6 08 ...
Page 134: ...Honeywell International Process Solutions 2500 West Union Hills Phoenix AZ 85027 ...
