Honeywell OW-CDX050, User Manual

Page: 80 / 134

Configuration
System Administration
68 OneWireless Multinode User's Guide R110
6/08
Step Action
5
Click on the Update Site Map button.
6
Verify the file has been transferred to the selected nodes successfully.
The File Tag shows the status of the nodes. If the File Tag matches the Local
File Tag the transfer was successful.
To generate and transfer a randomly generated configuration file to a multinode:
Step Action
1
Click Generate button.
A random mesh configuration file is created in a temporary file and an Install
button appears.
This configuration file is used to update the bridging SSID and bridging
encryption on other devices using the existing bridging link. If the bridging key
or the bridging SSID is changed on the normal configuration screen, then the
bridging link to the other devices will be terminated, and the configuration can
not be updated.
2
Select the Disable radio button in the Automatic IP Address Configuration
field.
3
To transfer the random bridging configuration file:
•
Select the Generated File radio button.
•
Check the nodes in the Site Map field that you want to transfer the file.
•
Click Apply .
4
Verify the file has been transferred to the selected nodes successfully.
Indicated in the Upgrade Status field of the Site Map.
5
Click Install to apply the randomly generated configuration file to the node.
Once applied, the node will reboot and start using the new configuration file.