OneWireless System
Overview
4
OneWireless Multinode User's Guide
R110
6/08
NOTE: The Key Server and Wireless Builder are installed on the OneWireless Server.
Figure 1 Honeywell’s OneWireless solution for Wireless Network for
Secure Industrial Applications (WNSIA)
OneWireless Network topology
Honeywell uses a wireless mesh network to achieve the OneWireless solution. A mesh
network provides multiple RF communication paths between multinodes and Wireless
System Gateways to transfer data to and from the wireless field devices. For example, in
Figure 1 the WSG is connected to the wired network of the control system. Four
multinodes are operating as Access Points (APs), communicating with the field devices
and the WSG. Each multinode also is communicating with the other multinodes to form
a mesh network. Multiple communications paths are also made between any field
device and the WSG via any multinode in the network. Wi Fi clients can connect to the
network via the multinode access points.
Summary of Contents for OW-CDX050
Page 1: ...OneWireless Multinode User s Guide OW CDX050 R110 6 08 ...
Page 24: ...Agency compliance information R TTE Directive 12 OneWireless Multinode User s Guide R110 6 08 ...
Page 82: ...Configuration System Administration 70 OneWireless Multinode User s Guide R110 6 08 ...
Page 134: ...Honeywell International Process Solutions 2500 West Union Hills Phoenix AZ 85027 ...
