manualshive.com logo in svg

Honeywell OW-CDX050, User Manual

Share
Download
Honeywell OW-CDX050 User Manual Download Page 130

Addendum 

OneWireless Multinode - Models WNMN and WNMS 

118 

  OneWireless Multinode User's Guide  

R110 

  

6/08 

The Honeywell WNMF and WNMS OneWireless multinodes are now ATEX certified, 
and all units manufactured currently and in the future will include labeling that includes 
all markings required under the ATEX directive.  

Purpose and Content 

This adendum includes information relative to both the Factory Mutual Approval and 
Canadian Standards Association Certification and as required under the ATEX Directive 
regarding: 

1.

 

The appearance and meaning of each certification mark (CE Mark) that appears on 
the label(s) affixed to the product. 

2.

 

Instructions for installation and use of the product within potentially explosive 
atmospheres. 

Information required for use of this product, and additional installation information, is 
included in: 

OW-CDX050  -  OneWireless Multinode User's Guide 

of which this adendum is a part. 

Details regarding certification marks that appear in labeling for this product are given in 
this addendum. 

 

 

ATTENTION 

The publications cited above and the functioning and construction (except for 
labeling) of the devices described therein are essentially unchanged.  The 
purpose of this addendum is to provide details the purpose and appearance 
of the labels attached to each device under ATEX Directive 94/6/EC. 

 

 

 

ATTENTION 

Before installing the equipment in a potentially explosive atmosphere, please 
read the information provided in this addendum, which supports the ATEX 
certifications for this product. 

 

CE Conformity 

The Multinode is in conformity with the protection requirements of the following 
European Council Directives: 94/9/EC, the Explosive Atmospheres (ATEX) Directive 
and 89/336/EEC, the Electromagnetic Compatibility (EMC) Directive and Radio and 
Telecommunications Terminal Equipment (RTTE) Directive - 1999/5/EC. 

Summary of Contents for OW-CDX050







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands