Honeywell OW-CDX050, User Manual

Page: 107 / 134

Wireless Mesh Configuration
Setting up wireless networks
R110 OneWireless Multinode User's Guide 95
6/08
Table 17 Repeater network settings for Manual Mesh
Screen and Option Multinode 1 Multinode 2 Multinode 3
Wireless Mesh - General screen
Mesh mode: Manual Mesh Manual Mesh Manual Mesh
Signal Strength LED
MAC: Not assigned (select
from drop-down list) Not Assigned (select
from drop-down list) Not Assigned (select
from drop-down list)
Spanning Tree
Protocol (STP)
802.1d: Enable (or Disable if no
mesh loop possible) Enable (or Disable if no
mesh loop possible) Enable (or Disable if no
mesh loop possible)
Wireless Mesh - Radio screen
Wireless Mode: 802.11a 802.11a 802.11a
Tx Rate: AUTO AUTO AUTO
Channel No.: Must be the same as
Multinode 2 Must be the same as
Multinode 1 Must be the same as
Multinode 1
Tx Power Mode: Auto Auto Auto
Propagation Distance: < 5 Miles < 5 Miles < 5 Miles
RTS Threshold: 2346 2346 2346
Beacon Interval: 100 100 100
Wireless Mesh - Encryption screen
Mesh encryption
options Must be the same as
other two multinodes Must be the same as
other two multinodes Must be the same as
other two multinodes
Table 18 Repeater network setting for Auto Mesh
Screen and Option Multinode 1 Multinode 2 Multinode 3
Wireless Mesh - General screen
Mesh mode: Auto Mesh selected Auto Mesh selected Auto Mesh selected
SSID Must be the same as
Multinode 2 Must be the same as
Multinode 1 Must be the same as
Multinode 1