Wireless Mesh Configuration
Setting up wireless networks
R110
OneWireless Multinode User's Guide
83
6/08
Point-to-Point network
Figure 11 shows an example of a point-to-point network, which is a direct
communications link (using 802.11a protocol) between two multinodes: Mesh node 1
and Mesh node 2.
Figure 11 Point-to-point network example
For two networks to be linked and communicating properly, the multinodes must be
configured with compatible options in the Wireless Mesh setup screens. Depending upon
whether manual or auto mesh is used, Table 13 and Table 14 show typical option settings
for setting up a point-to-point network as shown in Figure 11. Make sure that the options
are set according to the values in the tables.
Summary of Contents for OW-CDX050
Page 1: ...OneWireless Multinode User s Guide OW CDX050 R110 6 08 ...
Page 24: ...Agency compliance information R TTE Directive 12 OneWireless Multinode User s Guide R110 6 08 ...
Page 82: ...Configuration System Administration 70 OneWireless Multinode User s Guide R110 6 08 ...
Page 134: ...Honeywell International Process Solutions 2500 West Union Hills Phoenix AZ 85027 ...
