Configuration
Services Settings
62
OneWireless Multinode User's Guide
R110
6/08
Step
Action
4
Enter a valid IP address in the
Source
field as the address where information
is accessed.
5
Select the type of
Access Control
from the drop down menu that defines the
permitted level of management interaction. (Set, Get and Trap)
6
If using Secure user configuration settings (SNMPv3):
•
Enter a User name (minimum of 8 characters)
•
Select from the drop down menu an Authentication type and enter a
password
•
Select from the drop down menu the Encryption type and enter a
password. Note:
DES
encryption type is recommended.
This configuration information also must be entered when setting up the
Network Management and Diagnostics application.
7
Enter System Information in the following fields.
•
Location
•
Contact
•
EngineID
8
Once you have selected the options in this screen, click
Apply
.
Summary of Contents for OW-CDX050
Page 1: ...OneWireless Multinode User s Guide OW CDX050 R110 6 08 ...
Page 24: ...Agency compliance information R TTE Directive 12 OneWireless Multinode User s Guide R110 6 08 ...
Page 82: ...Configuration System Administration 70 OneWireless Multinode User s Guide R110 6 08 ...
Page 134: ...Honeywell International Process Solutions 2500 West Union Hills Phoenix AZ 85027 ...
